|
TORCH-ON MEMBRANE
It is laid using a blow lamp powered by liquified
petroleum gas to melt the bituminous surface prior
to laying on already primed and dried substrate.
Cold
Applied System
It
is a self adhesive sheet
membrane comprising of a polymer modified bitumen
layer internally reinforced with polyester. There is
a silicon release paper or polythene which is
removed just prior to laying. It comes in black,
grey, aluminium finishing.
MEMBRANE: 1m wide x 10m long rolls.
|
SPECIFICATION |
|
TORCH-ON WATERPROOFING MEMBRANE |
|
COLD – PROCESS WATERPROOFING MEMBRANE |
|
|
The Waterproofing shall be 3mm, 4mm or 4.5mm thick
membrane comprising of modified elastoplastomeric
waterproofing membranes, a non woven rot proof
polyster. To be bounded using a blow lamp powered by
liquified petroleum gas to the already primed and
dried surface. |
|
The waterproofing shall be 1.5mm or 2mm thick self
adhesive sheet membrane comprising a rubber /bitumen
compound and special composite film and shall be
laid on to smooth concrete substrate and on to
vertical surfaces primed with bituminous primer. |
|
To be supplied and installed by SAEE Waterproofing
Technologies of 22-24 Atanda Alonge Street, Lagoon
foreshore, near police station, Oworonshoki. Lagos.
Nigeria. e-mail: info@saeewaterproofing.com.
TECHNICAL SUPPORT.
SAEE Waterproofing Technologies offers a
comprehensive technical support service to
specifiers and construction companies on site and
off site.
|
